| After-sales Service: | Life Long Service |
|---|---|
| Warranty: | Two Years |
| Condition: | New |
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 1.product introduction :
Waste carbonization pyrolysis furnace: a kind of equipment that can reduce and harmless treat medical waste .
During the operation of the equipment,the waste of organic waste isremoved by the heat energy generated by the magnetic
core assembly,and then pyrolysis and carbonization is carried out,resulting in only a small amount of ash powder.
The core technology is to make the oxygen atoms into the furnace more active and more closely combined with the carbon
atoms through the soecial arrangement of magnetic core components,so as to speed up thecarbonization speed of waste,
improve the carbonization temperature,and realize the waste reduction treatment by using the self calorific value of waste .
2. product characteristic:
| 1.Nocoal,nooil and no auxiliay fuel are used in the waste treatment process,and the operation cost is low. | |||||||||
| 2.The treatment range is wide ,and the garbage can be directly feed into the furnace without sorting . | |||||||||
| 3.Small amount of flue gas,less harmful components,simple treatment process and low treatment cost. | |||||||||
| 4.The effect of waste reduction is obvious.The ash powder produced after carbonization and pyrolysis can be used as raw mateerials for cement plant,birckmaking,subgrade soil,covering soil,etc. | |||||||||
| 5.The treatment process is simple,and the waste leachate is fed into the furnace together with the waste without supporting waste leachate treatment. |
3.Incinerator structure:
| nuble | equipment name | Specification and modle | quantity |
| 1 | Feeding device | FS001 | 1seat |
| 2 | Carbonization pyrolysis furnace | AEHJ-20 | 1seat |
| 3 | Secondary combustion chamber | SC-20 | 1platform |
| 4 | Flue gas cooling device | FC110 | 1platform |
| 5 | Lime spraying device | QLS-350 | 1seat |
| 6 | Activated carbon injection device | ACL-75 | 1platform |
| 7 | Bag filter | CB-20 | 1platform |
| 8 | Fan | AEH-Series high pressure centrifugal fan | 1set |
| 9 | Slag conxeyor | SC-20 | 1platform |
| 10 | Control cabinet and componente | CC-010 | 1set |
4.Tail gas reference standard:
The pollution control standard for hazardous waste incineration (GB18484-2001) of the State Environmental Protection Administration was implemented on January 1, 2001. The allowable concentration of pollutants discharged from flue gas is as follows:
| number | contaminants | Maximum allowable emission concentration limit under different incinerator capacity(mg/m3) ≤300(Kg/h) 300~2500(Kg/h ≥2500(Kg/h) |
|
| 1 | Smoke blackness | Ringerman level1 | |
| 2 | Smoke | 100 80 65 | |
| 3 | Carbon monoxide | 100 80 80 | |
| 4 | Sulfur dioxide | 400 300 200 | |
| 5 | Hydrogen fluoride | 9.0 7.0 5.0 | |
| 6 | Hydrogen chloride | 100 70 60 | |
| 7 | Nitrogen oxide | 0.1 | |
| 8 | Mercury and its compounds | 500 | |
| 9 | Cadmium and its compounds | 0.1 | |
| 10 | Arsenic nickel and their compounds | 1.0 | |
| 11 | Lead and its compounds | 1.0 | |
| 12 | Chromium,tin,antimony,copper,manganese,and their compounds | 4.0 | |
| 13 | Dioxins | 0.5TEQ ng/m3 |
| Processing capacity (t) | 5 |
| Main furnace size (mm) | 2550*4200*6500 |
| Exhaust temperature (ºC) | ≤2000 |
| Waste calorific value (kal/kg) | ≥1200 |
| Heat loss rate | ≤3% |
7.Our transportation:
6.Our factory:
AOERHENG company covers an area of 20000 square meters. The company adopts modern enterprise management concept. seiko manufacturing. forge ahead. the product quality is superior to the domestic and foreign counterparts products.
Company technical force is abundant. the craft is advanced. complete range of articles. in strict accordance with ISO9001 standards. organization.design. production.sales and management.
Company sets scientific research and development. engineering design. installation. debugging. production services for the integration of domestic comprehensive backbone enterprises.
Products with free-pollution disposal equipment. garbage disposal equipment. high concentration wastewater treatment equipment. organic fertilizer production equipment. air treatment equipment.
Sludge treatment equipment. automobile processing equipment such as environmental protection equipment . And can design according to customer demand.
Customization of all kinds of efficient and practical equipment and production line.
7.Our services:
pre-sale
){kind=link}
){kind=link}