Multi-Functional Solid Waste Crusher for Garbage Management

• After-sales Service: Lifelong Service
• Warranty: Two Years
• Type: Cutting Shredder
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: HRXS-2S0410
• Raw Material: Kitchen Waste Domestic Garbage
• Structure: Top Feed
• Knife Classification: Piece Knife Crusher
• Knife Roll: Solid Knife Roller
• Automation: Automatic
• Computerized: Computerized
• Certification: CE, ISO9001:2008, QS, GMP
• Frame: Integral Steel Frame
• Blade Material: 9crsi
• System: PC Automatic Control System
• Feeding Mode: Top Feed
• Power(Kw): 37*2
• Size (mm): 1000*830*440
• Transport Package: Wooded Box and Bulk
• Specification: 5t/day
• Trademark: HRXS
• Origin: China
• HS Code: 84778000
• Production Capacity: 50000 Sets / Year
• Package Size: 260.00cm * 150.00cm * 280.00cm
• Package Gross Weight: 5000.000kg

Product Description

                                   Animal single shafe shredder for pig/shepp /cattle

1.Equipment introduction:

     This series of shredder has the functions of tearing, squeezing and biting, and is equipped with start, stop, reverse and

overload automatic reverse control functions to effectively protect the tools and the main parts of the machine. It has the

characteristics of low speed, high torque and low noise. The bearing seat adopts the split form, which is easy to disassemble

and change tools.



2.Shredding blade:

Pineapple knife structure
 

It is suitable for tearing hard plastics such as circuit boards, and can tear materials to a size of less than 10mm

 SW type cutter body structure

    It is suitable for tearing general products, such as wood. Fragile or brittle materials such as aluminum engine housing

 

SPR knife structure

    It is suitable for treating domestic wastes such as RDF and MSW for pre crushing and unpacking, and the material discharge is less than 300mm

 

Assembly tool body structure

    Suitable for tearing heavy metals or plastics, such as refrigerators,metal barrels and materials above 10mm

 

Integral cutter body structure

    It is suitable for tearing up all kinds of materials, such as electronic waste, hard plastic, rubber and packaging barrels of all kinds of materials

3. Performance characteristics of double shaft shredder:

    The materials vertically fall into the high-speed rotating impeller from the upper part of the machine. Under the action of high-speed centrifugal force, they are separated with another part in the form of umbrella. The materials around the impeller produce high-speed impact and crushing.

    After the materials collide with each other, they will form eddy currents between the impeller and the casing, collide and rub with each other for many times, and discharge directly from the lower part, Form a closed circuit for multiple cycles, and the screening equipment controls to achieve the required particle size of finished products.


4. Equipment operation:
 

5.1 preparation:
    Before starting the machine, first check whether there are materials, sundries and jamming in the crushing chamber; before starting the machine every day, check whether all fasteners are completely fastened, and deal with them immediately if they are loose; check the lubrication of each rotating part before starting the machine

 5.2 Start up: 
    The machine and transmission parts can be started up only after the inspection proves that they are in normal condition; the machine must only be started under no load, otherwise it is easy to damage the motor, reducer, coupling, etc; start (jog the test run first) if there is any abnormal condition or abnormal sound, stop the start immediately, find out the cause and eliminate the fault before starting again

5.3 Machine operation:
    When the machine is running, the maintenance personnel should often go to the side of the machine to observe the operation: whether the machine has abnormal sound. If it occurs, first determine the position, and then stop the machine for inspection and treatment; whether the temperature rise of the motor is too high.

    Under normal conditions, the maximum temperature shall not exceed 80 ºC; check whether the bolts at the rotating part are loose. If they are loose, stop the machine immediately.

5.4 Shut dowu:
    Before the machine stops working normally, the feeding shall be stopped first, and the crusher can be stopped only after all materials in the standby are broken.
  
    In case of machine failure or dangerous situation, the power supply can be cut off immediately.

5.Specifications and technical parameters of double shaft shredder:
 

Erial number	Model	Tear cavity size long×wide×high      (mm)	Blade diameter              (mm)	Blade   thickness           (mm)	Spindle   speed         (rpm)	Motor   power         (kw)	Tearing particle size               (mm)	Yield        (t/h)
1	2S0206	600×410×230	Φ200	15-30	12-25	11*2	3-30	0.3-0.6
2	2S0208	800×410×220	Φ200	15-30	12-25	15*2	3-30	0.5-1.0
3	2S0308	800×620×330	Φ300	15-35	10-22	18.5*2	3-30	0.8-1.6
4	2S0310	1000×620×330	Φ300	20-40	10-22	22*2	3-30	1.2-2.0
5	2S0312	1200×620×330	Φ300	20-40	9-16	30*2	3-30	1.8-2.8
6	2S0410	1000×830×440	Φ400	20-40	9-16	37*2	3-30	2.0-3.6
7	2S0412	1200×830×440	Φ400	20-45	9-15	45*2	3-30

5.Enterprise certification:
6.Transport:
    The Multi-Function Double Shaft Shredder is a powerful and versatile machine designed for shredding solid waste, medical garbage, and domestic waste. With its biaxial cutting system, this shredder can efficiently shear through various materials, making it ideal for industrial and commercial applications. The hydraulic shearing and bending capabilities of this machine ensure precise and consistent results, while the double shaft design enhances cutting efficiency. Whether you need to process metal, plastic, or other materials, this shredder is equipped to handle the job effectively. Invest in the Multi-Function Double Shaft Shredder for reliable waste management and recycling solutions.