| After-sales Service: | Lifelong Service |
|---|---|
| Warranty: | Two Years |
| Type: | Cutting Shredder |
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
| Tear up the box body: the box body is welded with high-quality steel plate to eliminate stress, and is machined and welded as a whole | |||||||||
| Blade part of shredder: the moving blade is made of special alloy steel, which can be reused after wear. The blade thickness is customized according to the requirements of discharging | |||||||||
| Cutter shaft: the cutter shaft is made of high-strength and heavy-duty special steel, with strong fatigue and impact resistance and long service life | |||||||||
| Power frequency conversion system: adopt automatic reverse electrification automatic system, intelligent control system and automatic production to ensure productivity efficiency |
| Serial number | model | Tear cavity size long×wide×high (mm) |
Blade diameter (mm) |
blade thickness (mm) |
spindle speed (rpm) |
motor power (kw) |
Tearing particle size (mm) |
yield (t/h) |
|
| 1 | 2S0206 | 600×410×230 | Φ200 | 15-30 | 12-25 | 11*2 | 3-30 | 0.3-0.6 | |
| 2 | 2S0208 | 800×410×220 | Φ200 | 15-30 | 12-25 | 15*2 | 3-30 | 0.5-1.0 | |
| 3 | 2S0308 | 800×620×330 | Φ300 | 15-35 | 10-22 | 18.5*2 | 3-30 | 0.8-1.6 | |
| 4 | 2S0310 | 1000×620×330 | Φ300 | 20-40 | 10-22 | 22*2 | 3-30 | 1.2-2.0 | |
| 5 | 2S0312 | 1200×620×330 | Φ300 | 20-40 | 9-16 | 30*2 | 3-30 | 1.8-2.8 | |
| 6 | 2S0410 | 1000×830×440 | Φ400 | 20-40 | 9-16 | 37*2 | 3-30 | 2.0-3.6 | |
| 7 | 2S0412 | 1200×830×440 | Φ400 | 20-45 | 9-15 | 45*2 | 3-30 | 3.0-4.5 |
| 1 | Electrical motor | 2 | Lock nut | 3 | Moving cutter head |
4 |
Fixed knife | 5 | Mainly axis | 6 | V-belt |
7 |
Belt pulley | 8 | Reducer | 9 | Coupler |
| 10 | Feed Hopper | 11 | Bearing seat | 12 | Steel frame |
| 13 | Out hopper |
| 5.1 preparation: before starting the machine, first check whether there are materials, sundries and jamming in the crushing chamber; before starting the machine every day, check whether all fasteners are completely fastened, and deal with them immediately if they are loose; check the lubrication of each rotating part before starting the machine |
| 5.2 start up: the machine and transmission parts can be started up only after the inspection proves that they are in normal condition; the machine must only be started under no load, otherwise it is easy to damage the motor, reducer, coupling, etc; start (jog the test run first) if there is any abnormal condition or abnormal sound, stop the start immediately, find out the cause and eliminate the fault before starting again |
| 5.3machine operation: When the machine is running, the maintenance personnel should often go to the side of the machine to observe the operation: whether the machine has abnormal sound. If it occurs, first determine the position, and then stop the machine for inspection and treatment; whether the temperature rise of the motor is too high. Under normal conditions, the maximum temperature shall not exceed 80 ºC; check whether the bolts at the rotating part are loose. If they are loose, stop the machine immediately. |
| 5.4shut dowu: Before the machine stops working normally, the feeding shall be stopped first, and the crusher can be stopped only after all materials in the standby are broken. In case of machine failure or dangerous situation, the power supply can be cut off immediately. |
){kind=link}
){kind=link}